[ Volver a la Página Inicial ]
CATEGORÍAS > COMPUTADORES > RAD KILOMUX 2000 |
Clasiefectivo Nro: 43187 |
|
|
|
Texto e Imagen del Clasificado |
Visitado 503 veces |
Título del Clasificado |
RAD KILOMUX 2000
|
Fecha
08/10/2009 21:10:44
|
Texto del Clasificado |
Two low speed data
channels
n Synchronous or
asynchronous operation
n Data rates selectable
according to three groups:
- 300 bps to 38.4 kbps,
sync and async;
- 7.2, 14.4, 28.8, 57.6 kbps,
sync and async;
- 8, 16, 24, 32, 48, 56,
64 kbps, sync
n V.24/RS-232 interface
n Various clocking options
n Independent parameter
selection for each channel
n End-to-end control signal
transfer
n Enhanced diagnostics
n Full support of V.54
loopbacks
DESCRIPTION
n The KLS.1 is a low speed data
module providing two RS-232/V.24
data channel interfaces for the
Kilomux-2000. The KLS.1 supports
synchronous or asynchronous
operation, selectable on each
channel.
n The two channels can be set to
one of three data rate groups:
Group 1: 300 bps to 38.4 kbps,
sync and async;
Group 2: 7.2, 14.4, 28.8, 57.6 kbps,
sync and async;
Group 3: 8, 16, 24, 32, 48, 56,
64 kbps, sync.
The data rate within each group is
independently selected for each
channel. Both channels must be set
to the same group.
n Channel interface is DCE,
providing timing signals for direct
connection to DTE. Connection of
tail-end circuits is supported using
buffering and retiming, to ensure data
integrity at all times. The channel may
also be configured to emulate DTE,
with Transmit Clock and Receive
Clock as inputs. Clock modes are
soft-controlled.
n Two control signals per channel
may be transmitted end-to-end for
handshaking purposes, or
alternatively, local support for the
control signals may be provided.
Typical end-to-end delay is 2.5 msec.
n Comprehensive diagnostic
capabilities reduce downtime to a
minimum. Diagnostics include V.54
loopbacks (activated via connector
pin or upon user command) and built
in BERT test, initiated upon user
command. Automatic self-test is
performed during power-up and
normal operation.
n Three Modes of V.54 loopback are
provided:
DCE-DCE: KLS.1 responds to LLB,
RLB (Loop 2, Loop 3) by activating
Local Loop or Remote Loop on each
channel.
DCE-DTE: KLS.1 transfers LLB, RLB
to the far end for activation of
loopbacks in the remote modems.
DTE-DTE: KLS.1 activates LLB, RLD
by soft command.
n Each channel terminates on a
25-pin D-type, female connector.
Pin-out assignment is in accordance
with ISO-2110/RS-232 specifications.
KILOMUX-2000 I/O Module
KLS.1 - 2 Channel Low Speed Data Module
Order
|
|
Datos Personales |
Nombre |
ALQUIMISTA67 |
Indicativo: |
07 BUCARAMANGA |
|
COLOMBIA |
Información Adicional acerca de este Clasificado |
Departamento |
Santander |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preguntas realizadas al Anunciante
|
HACER UNA PREGUNTA AL ANUNCIANTE ALQUIMISTA67
|
|